Knowledge

Home > Knowledge > Content
Performance indicators of the sliding support series
Oct 06, 2018

The stainless steel sliding hinge is a link type movable linking device that connects the sash and the window frame and contributes to the free opening and closing of the window. In general, the choice of the sliding support needs to be determined according to the weight of the window and the size of the window.

 

The requirements for the performance of the product should be: 1. The self-positioning force of a group of sliding supports can be adjusted to not less than 40N; 2. The opening and closing force of the sliding door of the external opening window should not be greater than 40N, in the range of 0 to 300 mm. Under the opening range, the opening and closing force of the outer open upper suspension sliding support should not be greater than 40N; 3, after repeated opening and closing 25000 times, the window fan opening and closing force should not be greater than 80N.

 

This series of sliding support products are mainly used for outer casement windows (window width less than 750 mm) and outer upper suspension window (the maximum height of the window sash when opening the limit of 300, the fan height should be less than 1200 mm). Generally used in light upper hanging windows, it can be used alone, and it needs to be added for heavy windows. The product is made of high-quality stainless steel and has a special structural design. Therefore, no additional support is needed in practical applications. Opening the window can keep the window at any angle without sliding down by gravity.

https://www.lihuiroller.com/

 








Copyright © Jiangsu Lihui Hardware Co.,Ltd All Rights Reserved.Tel: +86-510-88310806